Advertisement
Preparing
(C-2)
(C-4)
Mount the battery pack on the camcorder. (0-2)
1
Align the right side of the battery pack
with the line on the camcorder.
2
Slide in the battery pack to the right.
Notes
• Make sure the battery fits completely on the
mounting surface of the camcorder.
Imperfect fit may damage the projections
on the camcorder.
• If your nose touches the battery pack,
adjust the position of the viewfinder by
sliding it while pressing PUSH SLIDE.
Battery life
A fully charged battery pack lasts for:
_B ' _ !
85
110
90
50
(approx. minutes, continuous recording
whenused indoors)
When the battery becomes weak, the _\3
indication and red lamp blink in the viewfinder.
(0-3)
Also the camera recording/battery lamps on the
camcorder blink.
Replace the battery with a fully charged one.
To remove the battery pack (0-4)
While sliding BATT up, slide out the battery pack
to the left.
Other options for charging
• AC-V55 AC power adaptor:
You can charge two battery packs simultaneously.
° BC-55, BC-77 portable battery charger:
You can charge a battery pack on 100 - 240V AC.
° DC-V30 car battery charger:
Yo_J"c:an charge a battery pack by connecting the car
battery charger to the cigarette lighter socket.
If you have an NP-4000
You can use it for long outdoor recording.
13
Advertisement
