Advertisement
(Q-2)
(Q-3)
p
(Q-4)
44
If your TV is connected with a VCR (Q-2)
Disconnect the antenna connection of the "IV and the
VCR, and insert the RFU adaptor between them.
The supplied AC-V60/V60A AC power adaptor is
required.
Make sure that the TV is turned off to prevent the
speaker being damaged.
Connect the AC power adaptor to the TV.
Use a commercially available audio/video
cable (like Sony VMC-710M/720M
for
monaural TV, or VMC-910MS/920MS
for
stereo TV).
2
Connect the AC power adaptor to a wall
outlet.
Usually keep the AC power adaptor and the TV
connected.
Proceed only the following two steps.
3
Attach the connecting plate of the AC
power adaptor to the camcorder.
4
Set the CHARGE/VTR
selector on the AC
power adaptor to VTR (DC OUT).
If your TV is connected with a VCR (Q-4)
Connect the AC power adaptor to the VCR instead of
the TV.
Advertisement
