Sony CDP-CX355 Operating Instructions Manual page 26

Labeling discs using the remote
DISC _------
DEL
MEMO INPUT _------
¢z) _ ¢z)
000
000
000
GE3 I_D
------- Number
buttons
------- ENTER
------- CLEAR
1
Press DISC.
2 Press the number button of the disc you want to
assign a Disc Memo, and then ENTER.
3 Press MEMO INPUT.
The flashing cursor ( u ) appears.
4
Press CAPS to find the letter type you want.
Each time you press the button, the letter type
changes cyclically among capital letters (AB), small
letters (ab) and numbers (12). To select a symbol,
you have to select the capital or small letter type.
The selected letter type appears in the upper right
of the display.
5
To input a letter, press the number button
corresponding to the letter you want (indicated
b_ide each number button).
The cursor disappears and the first space for the
Disc Memo flashes.
Each time you press the button, the letter changes
cyclically among the ones indicated beside the
button.
To input symbols, press the number button 1
repeatedly until the symbol you want appears in
the display.
Characters assigned to
each number button
Example: To select the letter E
Press the number button 3 twice.
D_E
Press3. Press3.
Press3.
To insert a space, press SPACE once.
6
Press CAPS and then select number you desire.
Press ENTER to select the character.
The selected character lights up, and the flashing
cursor appears to indicate the next space to be
input.
You can also go to the next space by pressing other
number buttons.
7
Repeat Steps 4 through 6 to input more characters.
8 Press MEMO INPUT to store the Disc Memo.
The Disc Memo lights up in the display.
ALL DISCS
20
OlSC
SONYHITS
Repeat Steps I through 8 to assign Disc Memos to
other discs.
26 us