Locating A Specific Disc - Sony CDP-CX355 Operating Instructions Manual

Locating a Specific Disc
AM
o oooo
I_ o oooo
ooooo
0
; _>_ +tO0 JOG
MEMO SEARCH
DISC _-------
Number _-------
buttons
>10 _-------
cz) _ c)
000
000
000
(_3 r_3
tED8E3
"_- ENTER
"_----_ MEMO SCAN
Locating a disc directly using the remote []
1
Press DISC.
2
Press the number button of the disc.
Example: To enter number 35
Press 3 then 5.
To enter number 100
Press 1, then 10/0 twice.
3 Press ENTER to start play.
Locating a disc by scanning each Disc
Memo (Memo Scan)
You can locate a desired disc to play quickly by
scanning the Disc Memos (see page 24) in the display.
Note that you cannot use this function in the ALL
DISCS Shuffle Play mode.
1 Press MEMO SCAN.
"MEMO SCAN" appears in the display, and the
Disc Memos scroll in the display.
2
Press [2> when the Disc Memo of the desired disc
to play appears.
The disc is set to the playing position, and the
player starts playing.
In Program Play mode, the disc will be added to
the end of the program if you press ENTER instead
of 12>.
Note
If "NO ENTRY" appears in the display, no di_ has been
labeled with the Disc Memo. Try the Memo Scan function
again after labeling tho discs.
Locating a disc on the player
Turn the JOG dial until the desired disc number or
Disc Memo (see page 24) appears in the display. Push
the JOG dial to start play.
To skip discsquickly
Press +100. Each time you press +100, the player skips
100 discs.
14 us