Making Video And Audio Connections - Sony Grand WEGA KDF-E55A20 Operating Instructions Manual

Your new LCD Projection TV can receive both analog and digital
broadcasting signals from antenna, satellite and cable TV.
To display clear crisp pictures, you must connect your TV correctly and
choose the correct display format (see Wide button on page 50). [t is strongly
recommended to connect the antenna using a 75-ohm coaxial cable to
receive optimum picture quality signal. A 300-ohm twin lead cable can be
easily affected by radio noise and the like, resulting in signal deterioration.
If you use a 300-ohm twin lead cable, keep it as far away as possible from
the TV.
Making Video and
Audio Connections
The signals that enter your TV and connected devices will need to output in
the correct format using the suitable connections. Below are different types
of video connectors available these days. Your TV comes with all types of
connectors with the exception of the DVI connector but your cable box or
satellite receiver may be equipped with this type. When connecting your TV,
use the inputs that are available on your devices that provide the best video
performance, as described below.
BesIVideo
Perlolmmlce
Connector Type
HDM[ (High-Definition No
Multimedia Interface)
o_
DVI (Digital Visual
:Interface) *
Component 000
0 s V DEO
@ Composite
Separate Audio
connection
required
RF/Coaxial
Yes
(not supplied)
No
_'_An adapter is necessary when connecting DVI equipped device to this TV,
see page 18.
t7