Sony Grand WEGA KDF-E55A20 Operating Instructions Manual page 24

Cable Box
Before connecting a
cable box, see "Using
CableCARD Device" on
page 25.
Your cable company scrambles all channels, which requires you to use a
cable box.
You do not have a VCR.
(If you
have a
VCR,
see pages 32 and
33.)
i i ili! i
Use tile TV's remote control to change channels coming through tile
cable box to the TV's VHF/UHFjack. (You must first program the
remote control for your specific cable box.)
Connect the CATV cable to the cable box's input jack.
Use a coaxial cable to connect the cable box's output jack to the TV's
VHF/UHF jack.
Run Auto Program, as described in "Setting Up the TV Channel List"
on pages 30.
CATV cable Coaxial cable
VHF/UHF
IN
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.
Set up the TV remote control to operate the cable Program the remote control. See "Programming the Remote
box Control" on page 44.
Activate the remote control to operate the cable Press once, and the
box indicator lights up.
Prevent the accidental switching of TV channels When using the cable box, ensure that the TV remains tuned to the
channel that the cable box is set to (usually channel 3 or 4).
22