Table of Contents
Advertisement
Using Audio and Video
Equipment
1
Turn on the connected equipment.
2
Press
to display the input source.
3
Press
/
then
input source.
The highlighted item is selected if 2 seconds
pass without any operation.
Note
• When connecting with an HDMI cable, be sure to use
HighSpeed HDMI Cable with Cable Type Logo
(Recommended SONY Cable).
• When connecting mono equipment, connect the
audio cable to the L (mono) jack.
• When connecting a device that has DVI output,
connect the DVI HDMI video cable to the HDMI IN 2
(ARC/DVI) and the DVI HDMI audio cable to the HDMI
2 AUDIO IN jack.
To use MHL device
Use an authorised MHL 2 CABLE with MHL logo
(not supplied).
The TV simultaneously charges the MHL-
compatible connected device while playing
photo/music/video files.
To use BRAVIA Sync devices
When connecting the TV to BRAVIA Sync
compatible equipment, you can control them
together.
Be sure to perform the necessary settings in
advance. The BRAVIA Sync Control settings must
be set on both the TV and the connected
equipment. See [BRAVIA Sync Settings]
(page 19) for the settings on the TV side. Refer
to the connected equipment operating
instructions for the settings on the connected
equipment side.
22
GB
to select the desired
Using Screen mirroring
(except KLV-32R412B, KLV-
28R412B)
Screen mirroring displays the screen of a
compatible device (e.g. smartphones) on your
large TV screen by Miracast technology.
No wireless router (or access point) is required
to use this feature.
1
Press the
/
[Screen mirroring] using
2
Operate the Screen mirroring
compatible device to connect with the
TV. Once connected, the screen will be
displayed on the device and also TV.
For details, refer to the instruction
manual of the device.
To list connected devices/deregister device
When the standby screen for the Screen
mirroring is displayed, press OPTION, then
select [Show Device List / Delete].
To deregister a device, select the device in the
list to delete, press
confirmation display.
To display dialogue when attempting to
connect a device with the TV
Activating this function can avoid an
unintended device from being connected.
When the standby screen for then Screen
mirroring is displayed, press OPTION, then
select [Registration Notification] [On].
Note that once you decline registration request
from a device, you will not be able to connect
the device unless you delete it from the device
list.
To change the band setting (for experts)
When the standby screen for Screen mirroring is
displayed, press OPTION, then select [Band
Setting].
Note
• Connecting devices must conform to the following:
Screen mirroring compatible devices:
2.4 GHz connection (5 GHz not supported).
• For information about the supported wireless band of
your device, refer to the instruction manual of your
device.
button, then select
/
buttons.
. Then, select [Yes] in the
Advertisement
Table of Contents
