General - Sony Grand WEGA KDF-E55A20 Operating Instructions Manual

General
How to restore the TV to Tnrn on the TV. While holding clown the tl. button on the remote control, press the
factory settings button on the TV. (The TV will turn iteself off, then back on again.)
Release tl. button.
WARNING: The Factory Reset will clear all of your customized settings
including setting.
How to restore Video settings Select menu option while in the Video menu (see page 58).
to factory settings
How to restore Audio settings Press menu option while in the Audio menu (see page 60).
to factory settings
Cannot cycle through the other Be sure the option is not set to (see page 70).
video equipment connected to
the TV
Cannot operate Menu If a menu option appears in gray, this indicates that the menu option is not
avail able.
Lost password In the password screen (see page 66), enter the following master password: .
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
TIMER is set The LED will remain lit even when the TV is turned oft'. To rest the timer or
cancel the timer, see page 73. If the LED (red) blinks continuously, this may
indicate the TV needs service.
Digital cable box does not work If you are connecting a VCR and digital cable box using a splitter, as described on
page .34, you must use a special bi-directional splitter that is designed to work
with your digital cable box. Contact your cable provider for details.
Cannot record digital channels Only analog channels can be recorded to your VCR.
to VCR
The replacement lamp does not The screw of the lamp cover may be slanted. Take out the screw, insert it straight
light up into the screw hole, and then tighten it completely (see page 76 for both
KDF-E55A20 and KDF-E60A20).
TV cabinet creaks When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not
a malflmction.
83