Connecting The Tv; Overview; Making Video And Audio Connections - Sony KDL-V26XBR1, KDL-V32XBR1, KDL-V40XBR1 Operating Instructions Manual

Connecting the TV

Overview

Making Video and
Audio Connections
Best Video
Performance
*An adapter is necessary when you are connecting a DVI-equipped device to this TV
(see page 20).
Your new LCD TV can receive both analog and digital (HD and SD)
broadcasting signals from antenna, satellite and cable TV company.
To display clear crisp pictures, you must connect your TV correctly and
choose the correct display format (see "Using the WIDE Button" on page
50). It is strongly recommended to connect the cable and antenna inputs
using a 75-ohm coaxial cable to receive optimum picture quality signal. A
300-ohm twin lead cable can be easily affected by radio noise and the like,
resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep
it as far away as possible from the TV.
The signals that enter your TV and connected devices will need to output in
the correct format using the suitable connections. Below are different types
of video connectors available these days. Your TV comes with all types of
connectors with the exception of the DVI connector but your cable box or
satellite receiver may be equipped with this type. When connecting your TV,
use the inputs that are available on your devices that provide the best video
performance, as to below.
Connector type
HDMI
(High-Definition Multimedia Interface)
DVI (Digital Visual Interface)
Component video
(480i/480p/720p/1080i)
Y P /C P /C
B B R R
S VIDEO
Composite video
RF/Coaxial
Separate audio
connection required
No
*
Yes
L-AUDIO-R
No
19