Connecting The Tv; Making Video And Audio Connections - Sony WEGA KLV S15G10 Operating Instructions Manual

Connecting the TV

Making Video and
Audio Connections
Best Video
Performance
To display clear crisp pictures, first you must connect your TV correctly and
also need to choose the correct display format (see "16:9 Enhanced" in
"Using the Setup Menu" on page 52). It is strongly recommended to connect
the antenna using the supplied 75-ohm coaxial cable to receive optimum
picture quality signal. A 300-ohm twin lead cable can be easily affected by
radio noise and the like, resulting in signal deterioration. If you use a 300-
ohm twin lead cable, keep it as far away as possible from the TV.
Your TV includes several types of video inputs. When connecting your TV,
use the inputs that are available on your devices that provide the best video
performance, as described below.
Connector type
Component video
(480i/480p)
Y P P
B R
S VIDEO
S VIDEO
Composite video
RF/Coaxial
When you connect video equipment to both the VIDEO and the S
VIDEO input jacks, make sure Auto YC in the Setup menu is set to
On to view the S VIDEO input (see page 52).
Separate audio
connection required
Yes
L-AUDIO-R
No
19