Setting Up The Tv Channel List; Using Initial Setup - Sony Grand WEGA KDF-E55A20 Operating Instructions Manual

After you finish connecting the TV. you can run the Initial Setup to create a
list of available analog and digital channels. The Initial Setup screen appears
when you turn on the TV for the first time after hooking it up. If you choose
to set up the channels at a later time select the Auto Program option in the
Channel menu to scan available channels (see below).
Using Initial Setup
ii !i iii i i ! i iii !i ¸ i i
U
Press to turn on the TV.
The Initial Setup screen appears.
Press 4"or ,!, to highlight the on-screen
display language. Then press @. The
message "First please connect cable/
antenna" appears. This may require 50+
minutes for completion and "Start auto program now'?" appears.
• ' " S" Press 4"or ,!, to h@ahght Ye.' then press @.
Auto Program performed through Initial Setup will automatically create a
list of receivable channels from both VHF/UHF antenna and cable TV
channels if both sources are connected.
Select Settings in WEGA GATE, and then go to Channel settings.
Select Auto
Program
then select Start.
30