Chargingthe Battery Pack - Sony DPP-FPHD1 Operating Instructions Manual

Chargingthe battery pack
Turn off the camera and place the camera
with the battery pack inserted on the camera
adaptor. Charging starts autonlatically. The
CHARGE indicator of the camera adaptor
lights up.
• When the camera is turned oil, the cantata
adaptor stops charging the battery pack.
• When the charging reaches to Normal
charge*, the CHARGE indicator goes off.
" Recording and playback
time wilh Normal
charge is approximately
90% of Full
chalge.
• The time of the full-charge for a
completely discharged battery at the
temperature of 25 'C (77 'F) is
approximately 230 minutes.
It may take longer to charge, depending
on the charging condition and
environment.
• If the motor in the printer is still running,
turn off the camera afler the motor stops
running. You cannot charge the battery
while the motor is running.
• If CHARGE indicator f:uls to light or
blinks lbr more than 10 seconds, reli:r to
"Troubleshooting".
• After attaching the cmnera to the camera
adaptor, the CHARGE indicator may flash
lot 3 to 10 seconds. This indicates
conlmmlication between the cantata and
the cmnera adaptor, am.l it is not a
malfunction.
Charging temperature
Tile temperature range for charging is 0 'C
to 40 °C (32 'F to 104 °F). However. to
provide maximum battery efficiency, the
recommended temperature range when
charging is 10 'C to 30 'C (50 'F to 86 'F).
2O