Sony DPP-FPHD1 Operating Instructions Manual page 23

• Printedresults
The printed pictures are poor in quality.
• Dust is on the ink ribbon. Wipe th,: plastic part of the ink ribbon and rcmow: dust.
• Dust or fingerprints arc imprinted on the printed surface. Do not touch the printing surface
(the glossy side with no imprint). Fingerprints on the printing surldce may result in imperfect
printing.
• Used print paper or ink ribbon is being used again. Do not use a used print paper. Printing an
image twice on the same paper will not make the printed image thicker. Doing so may cause a
malfimction.
The picture quality and colors of the image previewed on the screen of the
camera differ from the ones actually printed.
• Colors and quality of an image "_ aries depending on the characteristics of the monitor or Ihc
LCD screen. The image displayed on the screen is used as rel_:rence only.
The image is not printed full size within print range.
• The print range differs depending on the image size. See page 30.
The printed image is crooked.
• Th,: paper tray is not inserted properly. Re-insert the paper tray firmly and straight until it
reaches the end.
An image rotated on the camera does not appear as it is on the print paper.
• When you try to print a rotated image, the printer prints the image before the rotation.
• Viewingimages withtheTV
Images/sounds cannot be played back on a TV.
• The audio cannot be output when
only
the component video cable is connected. Connect Ihe
A/V connecting cable to the audio jack corresponding to the component video jack.
• The HD component video out setting of the camera may not be correct. Refer to the operating
instructions supplied wilh the camera, and set the "COMPONENT" setting correctly.
Images cannot be output via the A/V connecting cable.
• If th,: component video cable is connected to the print,:r and the TV, unphlg the component
video cable from the printer.
23