Sony DPP-FPHD1 Operating Instructions Manual page 14

Set the print paper into the tray.
You can sel up 1o 2(1 shecls ot print paper.
Riffle the print paper d/oroughly. Insert the
print papcr into tile tray, with tile protective
sheet at tile top.
If tl/ere is no protective sheet:
Ritlle the print paper thoroughly. Then inscrt
tile print paper with its printing sultace (tile
side with no imprint) [_cing up.
4
Remove the protective sheet.
Printing
Paper
feeding
direction
5 Close the paper tray lid.
• Set tile print paper toward the paper li:eding
direction witll the back of paper witll tile
SONY logo lacing down.
The back of print --
paper
WNote
Do not touch tile printing surlace.
Fingerprints on tile printing surlhce may result in
imperfect printing,
14