Setting Up The Channel List - Initial Setup - Sony SXRD KDS50A2000 Operating Instructions Manual

Getting Started
Setting Up the Channel List - Initial Setup
After you finish connecting tile TV. you can run tile Initial Setup to create a
list of available analog and digital channels. The Initial
Setup
screen
appears when you turn on the TV for the first time aiter hooking it up.
1
Press _1_ to turn on the TV.
The Initial Setup screen appears.
2 Press 11411. to highlight the on-screen
display language. Then press @. The
SS
me.. age Start auto program now'?"
appears.
3 Press 4,/!!. to highlight Ye: then press @.
Auto
Program
performed through
Initial
Setup
will automatically create a
list of receivable channels from both VHF/UHF antenna and cable TV
channels if both sources are connected.
If you choose to set up the channels
at a later time, select the Auto
Program
option in the Channel settings to scan available channels (see page 41 ).
'/_ If you select "No" during Initial Setup, the Initial Setup screen will
reappear each time you turn on the TV until you complete Auto
Program.
_b
21