Sound Settings - Sony SXRD KDS50A2000 Operating Instructions Manual

Sound Settings
Using the Menus
To display the Sound settings, see "Navigating Through Settings" (page 33).
Sound Mode Dynamic
Select to enhance treble and bass.
Standard Suitable for spoken dialog.
Custom Flat setting. Allows you to store your preferred settings.
.... ,:;z_You Mode
the TV input and for each Video input (Video 1 to Video 7). Your Sound Mode
settings are automatically saved upon selectionl
Reset Resets the following options to default values: Treble, Bass, Balance, Steady Sound,
Volume Offset, Surround trod BBE.
Treble Adjust to increase or decrease higher-pitched sounds.
Bass Adjust to increase or decrease lower-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
Steady
Sound On Select to stabilize the volume across all programs and commercials.
Off Select to turn off Steady Sound.
Volume Offset
Adjust the volume level of the current
input (TV or video
input) relative to other inputs.
Surround TruSurround XT Select for surround sound (for stereo programs only).
Off Select for normal stereo or mono reception.
BBE Select to give sound more impact by compensating for phase effects in speakers. Select
l¥om High, Low and Off.
BBE is avaiiabie oniy when Sou nd
Mode is sei io Customi
MTS Stereo Select for stereo reception when viewing a program broadcast in
Eqjoy stereo, bilingual stereo.
and morn) programs
Auto SAP
Select to automatically switch to second audio programs when a
signal is received. If no SAP signal is present, the TV remains in
Stereo mode.
Mono Select for mono reception. Use to reduce noise during weak stereo
broadcasts.
f_ MTS is avaiiaNe only for anaiog programsl
(Continued)
37