Setting Up The Channel List - Initial Setup - Sony XEL-1 Operating Instructions Manual

3. Setting Up the Channel List
- Initial Setup
The
Initial Setup
screen appears when you turn
on the TV for the first time.
After you finish connecting the TV, you can run
Initial Setup
to create a list of available analog
and digital channels if you have connected an
antenna or cable directly to the TV's VHF/UHF/
CABLE input.
You will be prompted to select the language of
your choice to be used for all the on-screen
settings.
Use the remote control to navigate through the
Initial Setup:
+/+
buttons:
Allow you to highlight options
where applicable.
[±] button:
1===11
Allows you to select the
~=~
highlighted option and advance
to the next screen.
• button:
Allows you to move back to the
previous screen .
.. button:
Allows you to move to the next
screen.
Follow the help text provided on the screen to run
Auto Program
with the connected signal source
or select
Skip
to skip the
Auto Program
if you
are receiving channels from a cable box or satellite
receiver and the VHF/UHF/CABLE input is not
connected. The
Auto Program
will scan for
available channels. When the
Auto Program
is
completed, the TV will display how many analog
and digital channels are found.
18
~
• If you accidentally turn off the TV during the Initial
Setup process, the Initial Setup will restart from the
beginning when the TV is turned back on.
• The Auto Program may be canceled while the
channels are being scanned. Press RETURN first then
press either +/+ on the remote control, highlight "Yes"
to cancel or "No" to resume Auto Program.
• If and when TV displays screen saver during the
Initial Setup, press +/+/+/+,
[±] or
VOL +/- to
return to the previously viewed screen.
o
To Run Initial Setup Again or Auto
Program at a Later Time
Select the Initial Setup feature under the category
Settings from the XMB
TM
(XrossMediaBar) or
refer to the Initial Setup described on page 42. To
run Auto Program, see page 37.
o
To Add Digital Channels
Use the Add Digital Channels feature as described
on page 37. (Useful for antenna installations.)
o
To Display the Picture in Your Preferred
Aspect Ratio
Select the proper Wide Mode as described on pages
22 and 34.
You may want to set up convenient features such
as
Favorites
(see page 21),
Show/Hide
Channels
(see page
37), Edit Channel Labels
(see page
37)
when
Auto Program
is completed.