Setting Up The Channel List - Initial Setup - Sony BRAVIA KDL-32S2400 Operating Instructions Manual

Getting Started
Setting Up the Channel List - Initial Setup
After you finish connecting your TV. you need to run Initial Setup, which
automatically sets up available channels. The Initial Setup screen appears
when you turn on your TV for the first time. If you do not want to set up the
channels at this time, you can do it later by selecting the Auto
Program
option in the
Analog
and
Digital Setup
settings (see pages 37 and 38).
POWER
1 Press C) to turn on tile TV.
The Initial Setup screen appears.
2
Press 4"/,I"to highlight the on-screen display language. Then press @.
The message "First please connect cable/antenna. Do you want to start
Auto Program?" appears.
3 Press <,/,_ to highlight "OK" then press @.
The message "Auto Program" appears. Then the message "Continue
programming digital channels'?" appears. This may require 50+ minutes
for completion.
4 Press <,/,1, to highlight "OK" then press @.
To run Auto Program again at a later time
[] Use tile Auto
Program
feature as described on pages 37 and 38.
To add individual digital channels
[] Use tile Digital Channels Add feature as described on page 38.
18