Table of Contents
Advertisement
Basic Operations
TV Controls
To open the cover
Be careful not to pinch your fingers
when opening the cover.
PowER
o
(n
[]
MENU
Press to display MENU with TV functions and settings (see "Overview of MENU" on page 32).
[]
=!=
Press to cycle through the vkteo inputs. If you set a certain input to Skip in Label Video
TVNIDEO
Inputs, then the input will not appear. For details, see page 45.
In the MENU screen, this button serves as confirming the selection or setting.
_,
,_
Press to ac{iust the Voh,me. In the MENU screen, these buttons serve as left/right buttons.
VOLUME +/-
[]
t-
_
Press to scan through channels. To scan quickly through channels, press and hold down either
CHANNEL +/-
-/+. In the MENU screen, these buttons serve as up/down buttous.
[]
TIMER LED
When the timer is set, this LED will remain lit even if the TV is turned off. For details, see
page 46.
[]
LAMP LED
Blinks in red when the lamp for the light source has burned out. For details, see "Replaciug the
Lamp" on page 51.
[]
POWER LED
Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see the contacting Sony information on page 2).
When the red LED blinks only three times, the lamp door of the lamp unit or the lamp itself is
not securely attached (see page 53).
[]
(IR) Infrared
Receives IR signals from the remote control.
Receiver
Do not put anything near the seusor, as its function may be affected.
[]
POWER
Press to turn on and oft'the TV.
[]
Speaker
Outputs the audio signal.
'fs The CHANNEL + button has a tactile dot. Use it as a reference when operating
the TV.
31
Advertisement
Table of Contents
