Self-Diagnosis Display/Warning Indicators - Sony Handycam HDR-PJ710V Operating Manual

•The r ecording media is full. Delete
unnecessary images (p. 5 4).
•Total number ofmovie scenes or photos
exceeds the
r ecordable capacity of your
camcorder (p. 78, 79). Delete unnecessary
images (p. 54).
The camcorder stops operating.
• The temperature
of your camcorder is
extremely high. Turn offyour camcorder and
leave it tor a while in a cool place.
• The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there tor a while, then turn on the camcorder.
"PlayMemories Home"cannot be installed.
• Check the computer environment or
installation procedure required to install
"PlayMemories Home"
Self-diagnosis
display/Warning
indicators
If indicators appear on the LCD screen or
viewfinder (HDR-CX760V/PJ760/PJ760V),
check the fbllowing.
If the problem persists ew, n after you
haw, tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, giw, them all the numbers of
the error code beginning with C or E.
You ma _ hear a melody when some
warnin indicators appear on the screen.
"PlayMemories Home" does not work
correctly.
• Quit "PlayMemories Home" and restart your
computer.
The camcorder is not recognized by the
computer.
• Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
• Disconnect the Built-in USB Cable froln the
computer and your camcorder, and restart
the computer, then connect the computer and
your camcorder again in the correct order.
• When both the Built-in USB Cable and the
USB jack of the camcorder are connected
to the external devices at the same time,
disconnect one that is not connected to a
computer.
C:04:[717
• The battery pack is not an "InfoLITHIUM"
battery pack (V series). Use an
"IntbLITHIUM" battery pack (V series)
(p. 18).
• Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 18).
C:06:[313
• The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13:[Z] [El / C:32:[Z][Z]
• Remove the power source. Reconnect it and
operate your camcorder again.
E:I717:1717
• Follow the steps from @ on page 74.
• The battery pack is nearly used up.
_5