Sony Handycam HDR-PJ710V Operating Manual page 15

HDR-CX760V/PJ760/PJ760V
To fastenthegripbelt
@
22
[] Power zoom lever (30)
[] PHOTO button (27)
[] Eyecup
[] Viewfinder (23)
[] CHG (charge) lamp (18)
[] Battery pack (18)
[] START/STOP button (27)
[] DC IN jack (18)
[] Viewfinder lens adjustment lever (23)
[] %q(microphone) jack (PLUG IN POWER)
[] _ (headphones) jack
[] A/V Remote Connector (50)
[] Grip belt
[] Loop for a shoulder belt
[] Built-in USB Cable (19)
[] BATT (battery) release lever (20)
[] Tripod receptacle
Attach a tripod (sold separately: the length of
the screw must be less than 5.5 mm (7/32 in.)).
Toattach the lens hood
.... o
Securing ring
Align the lens hood with the camcorder properly
((L)), then turn the securing ring of the lens hood
in the direction of the arrow ((2)).
• When attaching the lens hood, align the
opening section of the lens hood with the flash-
emitting section of the camcorder properl3c
• To remove the lens hood, turn the securing ring
of the lens hood in the opposite direction f)com
that of the arrm_c
• Remove the lens hood when you record movies
using the NightShot function. If you do not do
so, the shadow of the lens hood will be reflected
and recorded in your movies.
• Remove the lens hood when you operate
the camcorder with the supplied remote
connnander.
_5