Switching Between Speakerphone And Handset; Call Time Counter; Last Number Redial; Recalling Recent Numbers - Geemarc Ampli500 User Manual

USING THE TELEPHONE

Switching between Speakerphone and Handset

To stop using speakerphone during a call, simply lift the handset.
To activate speakerphone during a call, press SPKR and replace the headset on the cradle at the
same time
Hands free calls can also be made using an optional Geemarc headset –see Optional Accessories
chapter

Call Time Counter

The call time counter will be displayed a few seconds after the phone number is connected and
starts ringing.
To stop the time counter, press C
If you press C twice, the time counter will be reset to 0.

Last Number Redial

The previously dialled number will be automatically redialled

Recalling Recent Numbers

You can call back any of the last 30 numbers dialed
Screen will display 'DIALLED', the last number dialled, total number
of numbers dialled plus time and date of displayed number
(if headset plugged in), the number will be automatically dialled
Lift the handset or press SPKR or press Headset
(if headset plugged in)
Await the dial tone and press REDIAL
Press OK
Use ▲ or ▼ to to select the number you wish to dial
Lift the handset or press SPKR or press Headset
17