Settings; Ringer Volume; Ringer Tones; Alarm & Ringer Settings - Geemarc Ampli500 User Manual

Ringer Volume

The ringer volume can be adjusted as high as 95 +dB.
A switch located on right side allows the ringer to be switched to OFF, LOW, HIGH.
Your telephone comes with the ringer switched to 'High'.

Ringer Tones

Select desired ring tone. Use ▲ or ▼ to scroll through and listen
Press C three times to exit or do nothing for 20 seconds and
the ring type will automatically be saved ready for the
Alarm and Ringer Settings
A 3-position switch located on the right side of the phone allows the settings below:
Ringer and strobe flash are activated (Normal Setting)
The other two settings are only effective when an optional vibrator pad has been added.
Ringer, shaker and strobe flash are activated
Ringer and shaker are activated
10

SETTINGS

Press MUTE
Use ▲ or ▼ to select 'SET PHONE'
Press OK
Use ▲ or ▼ to select 'SET RING'
Press OK
to the 4 tones available
Press OK to select desired ring tone
next incoming call