Windows System Requirements - Epson C120A User Manual

8
caution
Using an improperly
shielded USB cable—
especially a cable more
than 6.5 feet long—may
cause the EPSON
Stylus Scan to
malfunction.
Notices Notices
Notices Notices
This chapter includes system and environmental requirements,
safety instructions, and other important information about your
EPSON Stylus Scan 2000.

Windows System Requirements

®
An IBM compatible PC with at least a 486/66 MHz (for
Windows 98) or 486/25 MHz (for Windows 95) processor
®
(Pentium processor recommended)
®
Microsoft Windows 95 or 98
At least 16MB of RAM (32MB or more recommended)
At least 50MB of free hard disk space (100MB
recommended)
VGA or better display adapter and monitor (24-bit color
recommended)
Double-speed (2 ) CD-ROM drive for installing the
x
software (quad-speed [4
Your system should have one of the following interfaces (USB
recommended):
Available USB port or hub connection, with shielded USB
"AB" interface cable, from Series A (computer) to Series B
(EPSON Stylus Scan), up to 6.5 feet (2 m) long
A high-speed, bidirectional, IEEE-1284-compliant parallel
cable (6 to 10 feet long); the cable must have a D-SUB,
25-pin, male connector for your computer and a 36-pin,
®
Centronics compatible connector for the printer
] or faster recommended)
x
Notices
139