Table of Contents
Advertisement
Problem
Recorded images are not
saved in memory.
Color of the playback image
is different from the image
on the monitor screen dur-
ing recording.
[+] and [–] operations do not
work while the 9-image view
is on the monitor screen.
Images are not displayed.
All buttons and switches are
disabled.
Monitor screen is off.
REFERENCE
Possible Cause
1. Camera powers down before the save operation
is complete.
2. Opening of the memory card slot cover before
the image save operation is complete.
1. Sunlight or light from another source is shining
directly into the lens during recording.
2. Image quality setting
You are operating [+] and [–] while the scroll opera-
tion is still being performed.
A memory card with non-DCF images recorded with
another camera is loaded in the camera.
Circuit problem caused by electrostatic charge, im-
pact, etc. while the camera was connected to an-
other device.
1. USB cable is connected.
2. Monitor screen is turned off in a recording mode.
1. If the
place batteries with a full set of new ones as soon
as possible.
2. Keep the memory card cover closed until the im-
age save operation is complete.
1. Position the camera so sunlight does not shine
directly into the lens.
2. Change to a higher image quality for recording.
Wait until image scrolling is complete before press-
ing [+] or [–].
This camera cannot display non-DCF images re-
corded onto a memory card using another digital
camera.
Remove the camera's batteries, disconnect the AC
adaptor, replace the batteries, and turn on power
again.
1. After confirming that the computer is not access-
ing the memory card, disconnect the USB cable.
2. Press DISP to turn on the monitor screen.
83
Action
indicator is on the monitor screen, re-
Advertisement
Table of Contents
