Table of Contents
Advertisement
Messages
Battery power is low.
NO IMAGES ON THIS
There are currently no images in memory.
MEMORY CARD!
RECORD ERROR
Image data save operation failed. Record the image
again.
DECODE ERROR
• Image is a format (JPG, AVI) that is not sup-
ported by this camera.
• Image file is corrupted or the file is a type that
cannot be displayed by this camera.
DCF ERROR
Indicates that the DCIM folder contains two or more
folders with the same serial number (due to using
your computer to transfer folders to the memory
card, etc.) Use your computer to access the
memory card and change folder serial numbers so
they are all unique.
Example:
Folders named 100_1214 and 100_ABCD have
the same serial number (100), which will cause
this error. Access the card and change the serial
number of one of the folders to a three-digit value.
REFERENCE
DIAL ERROR
MEMORY FULL
CHANGE SIZE /
QUALITY OR
DELETE UNNEEDED
IMAGES.
NOT FORMATTED
FORMAT
SHUTTER
INSERT MEMORY
CARD!
85
Indicates that the dial is positioned between two set-
tings (icons). Correctly position the dial at the set-
ting you want to use.
• No more images can be stored under the current
image quality and size settings, but further re-
cording is possible with different settings.
Change the image quality and size settings, or
delete images you no longer need (page 64).
• Memory is full. If you want to record more im-
ages, delete images you no longer need (page
64).
• This message also appears after data is trans-
ferred to a memory card from a computer when a
DCIM folder or other required files (page 77) can-
not be created because there is not enough
memory card space. Use your computer to free
up space by deleting files you no longer need.
The memory card is not formatted. Format the
memory card (page 41).
There is no memory card in the camera. Load a
memory card (page 38).
Advertisement
Table of Contents
