Casio CFX-9850G User Manual page 64

Data-Log Mode
This mode is for displaying data stored in data analyzer memory. Pressing
[DataLOG] while in the Communications Mode enters the Data-Log Mode,
which is indicated by the DATA-LOG indicator on the display.
When you enter the Data-Log Mode, the channel indicator of the first channel
for which there is data in memory starts to flash, and the first data item for
that channel appears on the display. Each press of [DataLOG] advances
sequentially through the data items, and the DONE indicator appears when
the final data item in memory is on the display.
The following describes key operations in the Data-Log Mode.
• [SHIFT] [DataLOG] displays the previous data item.
• Pressing [DataLOG] while the last data item for a channel is on the display
jumps up to the first data item for that channel. Pressing [SHIFT] [DataLOG]
while the first data item displayed jumps down to the last data item.
• [CH-View] changes to another channel.
The following shows a typical example of data displayed in the Data-Log
Mode.
Pressing [MODE] or [HALT] while in the Data-Log Mode returns to the Com-
munications Mode.
• The Data-Log Mode can be entered only when there is sampled data in
data analyzer memory.
• If data has been Stat post-processed, the Data-Log Mode display shows
only the mean value.
Chapter 2: Modes
19