Canon EOS REBEL T2I Instruction Manual page 93

Viewing the images on TV
terminal Doing so may cause a malfunction.
*_ Some TVs might not be able to display the captured images. _n such a
Case, use the provided AV Cable to connect to the TV.
@ The camera:s <A/V OUT/DIG|TAL > terminal and <HDMJ OUT >
terminal cannot be used at the same time.
For HDMI CEC TV sets
When a TV set compatible with HDMI CEC* Jsconnected to the camera with the
HDMI cable, you can use the TV set's remote controt for pJayback operations.
* A functionenablingyou to control muttipleHDMIdeviceswithone remotecontrolunit.
168
1
2
SeJeet [CtH over HDMJ].
® Underthe[B:] tab,seJect [ CtrJ over HDMt], t hen
press< _>. SeJect [_nable],thenpress<_ >.
_y,, W hen the camera is connected to a TV
set, the TV set's input will automatically
switch to the HDMI port connected to the
camera. When you press the camera's
<[E]> button, you can use the TV set's
remote control for playback operations.
SeJeet the image.
® Point the remote control to the TV set
and press the _-1-, button to select the
image. Then press the Enter button.
_y,, T he menuwill appear. The menu displayed
will differ for still photos and movies.
® Press the _-t-, button to select an
option, then press the Enter button.
_y,, F or a slide show, press the remote
control's tl$ button to select an
option, then press the Enter button.
® Select [Return] and press the Enter
button.The menu will disappear and you
can use the _-1-, button to select an image.