Canon EOS REBEL T2I Instruction Manual page 89

Editing the Movie's First and Last Scenes _
You can edit out the first and last scenes of a movie in 1=sec. increments=
On the movie playback screen,
select [_ ].
_ The editing screen will be displayed.
_ Specify the part to be edited out.
® Select either [_] (Cut beginning) or
[_] (Cut end), then press <_>.
® Press the <_> key to see the
previous or next frames. Holding it
down will fast forward the frames.
® ,Afterdeciding which part to edit out, press
<_>. The portion highlighted in blue on
the top of the screen is what will remain.
:1_, Check the edited movie.
® Select [_] and press <_> to
playback the portion highlighted in blue.
® To change the editing, go back to step 2.
® To cancel the editing, select [_] and
press <_>.
,Z_ Save the movie.
® Select [[C_], then press <_>.
_y,, T he save screen will appear.
® To save it as a new movie, select
[New file]. To save it and overwrite
the original movie file, select
[Overwrite]. Then press <_>.
_ Since the editing is done in l:sec, increments (positian indicated by
[_ ]), the exact position where the movie !s edited may differ slightly from
the position you Specified.
®_ If the card does not have enough room, [New rite] will not be selectable.
_b More movie editing functions are available with ZoomBrowser EXJ
ImageBrowser (provided software).
164