Canon EOS REBEL T2I Instruction Manual page 67

Handy Features
Auto Rotation of VertieaJ Images
Vertical images are rotated automatically so they
are displayed vertically on the camera's LCD
monitor and computer instead of horizontally. The
setting of tMs feature can be changed.
Under the [9"] tab, select [Auto rotate],
then press <{_>. The available settings
are described below. Select one, then
press < {_ >.
® [On a _] : The vertical image is automatically rotated during playback
on both the camera's LCD monitor and on the computer.
® [On _] : The vertical image is automatically rotated only on the
computer.
® [Off] : The vertical image is not automatically rotated at all.
® The verticaJ image is not rotated during the image review
immediateJy after it is captured.
Press the <[E]> button and the image playback will display the
rotated image.
® [On _ _] is set, but the image does not rotate during pJayback.
Auto rotate will not work with vertical images captured while [Auto
rotate] was set to [Off]. Also, if the vertical image is taken while the
camera is pointed up or down, the image might not rotate for
playback. In such a case, see "Rotating the Image" on page 159.
® On the camera's LOB monitor, I want to rotate an image
captured when [On_] had been set.
Set [On_ _], then playback the image. It will be rotated.
® The vettica_ image does not rotate on the computer screen.
The software used is not compatible with image rotation. Use the
software provided with the camera instead.
142