Setting The Auto Power-Off Time; Setting The Lcd Monitor Brightness - Canon EOS 450D Instruction Manual

Handy Features
Setting the Auto Power-off Time
To save battery power, the camera turns off automatically after the set
time of idle operation elapses. You can set tMs auto power-off time.
When the camera has turned off due to auto power off, you can wake
up the camera by pressing the shutter button halfway or any of the
following buttons: <MENU> <DISR> <EE)> <{_> etc.
if [Off] has been set, either turn off the camera yourseff or press
the <DJSR> button to turn off the shooting settings dispJay to save
battery power, if [Of_ has been set and the camera is not used for
30 rain., the LCD monitor wHJ turn off automatically. To turn on the
LOB monitor again, press the <DJSR> button.
Under the [t? °] tab, select [Auto power
off], then press < _>. Set the time, then
press < _ >.
Setting the LCD Monitor Brightness
You can adjust the brightness of the LCD monitor to make it easier to read.
Under the [J'9:] tab, select [LCD
brightness], then press <_>. With the
adjustment screen displayed, press the
<_ > key to adjust the brightness, then
press < _ >.
When checking the exposure of an
image, prevent the ambient light from
affecting the reviewed image. Also,
setting the LCD monitor brightness at the
center of the adjustment scale is
recommended.
109