Table of Contents
Advertisement
Your printer switches to the modem port or won't confirm on the printer
port (Macintosh)
Possible cause
Your Macintosh has
extension conflicts.
You're using an
AppleTalk cable.
Your printer icon doesn't appear in the Chooser (Macintosh)
Possible cause
Your Macintosh has
extension conflicts.
The Chooser contains
too many items.
Your application program can't open your image file (Macintosh)
Possible cause
Not enough memory
is allocated to the
application.
Troubleshooting
Solution
®
Make sure AppleTalk
printer (such as the LaserWriter) and choose the printer port. Close the
Chooser, then reopen it and select the SC 740 icon and the printer port.
Then restart your system.
Make sure you're using a standard Apple System Peripheral-8 cable.
See
Macintosh System Requirements
Solution
Disable Quick Draw GX in the Extensions Manager. Make sure EPSON
Monitor3 and SC 740 are enabled, and then restart your Macintosh.
Delete unused items or move them to the Extensions (Disabled) folder.
Then check for your printer icon in the Chooser again.
Solution
Highlight the program icon and select Get Info from the File menu, then
increase the memory allocated to the application.
is inactive. In the Chooser, select any Apple serial
for more information.
Page 154
Advertisement
Table of Contents
