Table of Contents
Advertisement
All the lights are flashing
Possible cause
You haven't removed
all the packing material
from the printer.
An internal error may
have occurred.
The printer has finished charging the ink cartridge, but the P power light is still
flashing
Possible cause
The ink cartridge
clamp isn't locked
down.
Packing material
remains in the printer.
The printer needs to
initialize.
Troubleshooting
Solution
Remove the tape and other packing material following the instructions
on the Unpacking Sheet .
Turn off your printer, wait a few seconds, and turn it on again. If the
lights still flash or stay on, contact your EPSON dealer or see
Get
Help.
Solution
Press down the clamp to lock it.
Remove the tape and other packing material following the instructions on
the Unpacking Sheet .
If the printer is not moving or making noise, but the
flashing after more than 5 minutes, turn the printer off. If the light is still
flashing when you turn it back on, contact your EPSON dealer or see
Where To Get
Help.
Where To
P
power light is still
Page 149
Advertisement
Table of Contents
