Table of Contents
Advertisement
Caution:
Never turn off the
printer while the
P power light is
flashing, unless the
printer hasn't moved
or made any noise for
more than 5 minutes.
Maintenance and Transportation
3
After the P power light stops flashing, print a page to test the
print quality and reset the cleaning cycle.
If you're connected directly to the printer, run a nozzle check.
Go to step 4.
If you're using DOS or printing over a network, open an
application and print a document containing black and color
data. Then go to step 8.
4
Start an application, open a document, and access the printer
settings dialog box as described in
Printing from a
Macintosh.
5
Click the Utility tab (Windows) or the
(Macintosh). You see the Utility menu.
6
Make sure paper is loaded in the printer and click the Nozzle
Check icon, then click Next. The nozzle check pattern prints on
your printer; see
details.
7
If the nozzle check pattern is complete, click Finish.
If the pattern is missing dots, click Clean to run another
cleaning cycle.
8
If you don't see any improvement after cleaning two or three
times, check the print quality solutions in Troubleshooting.
Printing from Windows
Examining the Nozzle Check Pattern
or
Utility icon
for
Page 130
Advertisement
Table of Contents
