Canon EOS REBEL T4I Instruction Manual page 86

f'_ Printing
[] Adjustment of Printing Effects
In step 4 on page 280, select the printing
effect. When the <[]> icon is displayed
brightly next to <_>, you can press
the <INFO.> button. You can then adjust
the printing effect. What can be adjusted
or what is displayed will depend on the
selection made in step 4.
®_ Brightness
The image brightness can be adjusted.
®_ Adjust levels
When you select [Manual], you can change
the histogram's distribution and adjust the
image's brightness and contrast.
With the Adjust levels screen displayed, press
the <INF0.> button to change the position of
the < | >. Press the < 4i_ > key to freely adjust
the shadow level (0-127) or highlight level (128-255).
_ _: Brightener
Effective in backlit conditions that can make the subject's face look
dark. When [On] is set, the face will be brightened for printing.
®_ Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
[] ® The [_l,:-Brightener] and [Red,eye co[r.] effects Will not be reflected On
the Screen.
_¢ When you select [Detail set.]i you can adjust the [Contrast], [Saturation],
[color tone], and[Color ba!ance]: To adjust the [Color balance]; use th e
<z'¢> keYs. B is for blue, A for amber, M for magenta, and G for green,
The image's color balance wil! be corrected towards the selecte d color.
_ f you select [C ear a ] a the pr nt ng effect sett ngs w be reverted to
their defaults.
282