Canon EOS REBEL T4I Instruction Manual page 81

Preparing to Print
_ PictBridge
_ lay back the image.
® Press the <[_]> button.
_y,, T he image will appear, and the <?'#'>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct
Do not use any interface cable other than the one provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. Resolve the problem displayed in the error message (p.284_
®, You can also print RAW images taken with this camera.
If you use a battery pack to power the camera, make sure it is fully
charged. With a fully-charged battery, printing up to approx. 3 hr. 30 min
is possible
Before disconnecting the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E8 (sold separately) to
power the camera is recommended.
277