Canon EOS REBEL T4I Instruction Manual page 85

p_ Printing
Set the date and file number
imprinting.
® Set them if necessary,
® Select <@>, then press <0>.
® Set as desired, then press <(_)>.
6Set the number of copies.
® Set it if necessary.
® Select <oj_>, then press <(_)>.
® Set the number of copies, then press
<:(_ >.
_7 Start printing.
® Select [Print], then press <_)>.
With Easy printing, you can print another image using the same settings.
Just select the image and press the < _ > button. With Easy printing, the
number of copies will always be 1. (You cannot set the number of
copies.) Also. any trimming (p.283) will not be applied.
The [Default] setting for pdnting effects and other options are the
printer's own default settings as set by the printer's manufacturer. Refer
to the printer's instruction manual to find out what the [Default] settings
are.
Depending on the image's file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
, If image tilt correction (p.283) is applied, it may take longer to print the
image.
To stop tile printing, press <_)>while [Stop] is displayed, then select
[OK].
, If you execute [Clear all camera settings] (p.210), all the settings will
revert to their defaults.
281