Canon EOS REBEL T4I Instruction Manual page 84

t_# Printing
_ Set the printing effects (image
optimization).
® Set them if necessary, if you do not
need to set any printing effects, go to
step 5.
® What is displayed on the screen
differs depending on the printer.
® Select the option, then press <0>.
® Select the desired printing effect, then
press <0>.
® If the <[]> icon is displayed brightly
next to <ll_]]_l >, you can also adjust
the printing effect (p.282).
Printing Effect Description
The image will be printed using the printer's standard colors.
_On
The image's Exif data is used to make automatic corrections.
Off No automatic correction will be applied.
The image will be printed with higher saturation to produce
_Vivid more vivid blues and greens.
_NR Image noise is reduced before printing.
B/W BtW Prints in black-and-white with true blacks.
B/W Cool tone Prints in black-and-white with cool, bluish blacks.
B/W Warm tone Prints in black-and-white with warm, yellowish blacks.
Prints the image in the actual colors and contrast. No
I!_Natural
automatic color adjustments are applied.
The printing characteristics are the same as the "Natural"
Natural M setting. However, this setting enables finer printing
adjustments than with "Natural."
The printing will differ depending on the printer. For details,
Default refer to the printer's instruction manual.
When you change the printing effects, changes are reflected in the image
displayed on the upper left. Note that the printed image may look slightly
different from the displayed image, which is only an approximation. This also
applies to [Brightness] and ]Adjust levels] on page 282.
28O