Canon EOS REBEL T4I Instruction Manual page 32

Easy Wireless Flash Shooting
_,_ Select [Built=in flash settings].
® SeJect [Built-in flash settings], then
press <_>.
5 Select [EasyWireless].
® Under [Built-in flash], select
[EasyWireless], then press <_)>.
6 Set [Channel].
® Set the transmission channel (1-4) to
the same one as the sJave unit.
Take the picture.
® Set the camera and take picture in
the same way as with normaJ
shooting.
Exit the wireless flash shooting.
® For [Built-in flash], seJect
[NormaIFiring].
_ Setting [E,TTL J rneterl] te [Evaluative] is iecommended.
Even though the firing 0f the built-in flash is disabled when
[EasyWJreJess] is set, it wil! still fire a smal! flash to €ontro! the slave unit.
Depending on shooting conditions, the flash fired to control the slave unit
may appear in the picture.
@ Firing a test flash is not possible with the slave unit.
228