Epson 300 User Manual page 64

Printing starts too high or too low on the page.
Cause
Margins are set incorrectly in
your application.
The size of the paper loaded
in the printer does not match
the paper size setting within
your application.
Print speed is not what you expect.
Cause
The image resolution and the
amount of color used in the
document may be too high.
The print head moved to the ink cartridge replacement
position unexpectedly.
Cause
The T cleaning button was
pressed while the V ink out
light was flashing or on.
6-10
Troubleshooting
What to do
Check that the margins are set
correctly in your program. See
"Printable area" in the Appendix.
Load the correct size of paper, or
change the paper size settings within
your application to match the size of
the paper you are using.
What to do
Carefully considering your use of color
and resolution can help you optimize
your printing times. For more details,
see "Increasing the Print Speed" later
in this chapter.
Note:
High resolution printing and color
printing significantly increase the amount
of data to be processed. These two factors
have the greatest effect on print speed.
What to do
The ink cartridge is low or out of ink.
Replace the ink cartridge as described
on page 5-2.