Operation - Epson 300 User Manual

Operation

The P power light is on but nothing prints.
Cause
The interface cable is not
plugged in securely.
Your interface cable does not
meet both the printer and
computer specifications.
Your software is not properly
set up for your printer.
Nothing prints and several of the control panel lights are on or
flashing.
Cause
Several common printer
errors have occurred at once.
What to do
Confirm that the cable is securely
fastened to the printer and the
computer. If the cable is connected
correctly, perform a printer operation
check as described on page 6-3.
Use an interface cable that meets both
printer and computer specifications.
See page 1-5.
Make sure that your printer is selected
in your software.
If you cannot select your printer,
install or reinstall the printer software
as described in Chapter 2.
What to do
Use the "Error indicators" table on
page 6-2 to determine what
combination of errors may have
occurred, and try the recommended
solutions.
Troubleshooting
6
6-7