Top View - Soleus Air GM-WAC-15ESE-C Operating Instructions Manual

ASSEMBLY & INSTALLATION (CONT.)
Top Angle Rail and Side Bracket Installation
1. Place the air conditioner on a hard flat surface.
2. Locate the foam gasket and top angle rail
3. Attach the foam gasket to the top angle rail
4. Install top angle side to cabinet as shown in FIG 7
Foam Gasket and Top
5. Slide the "I" section of the window panel into the side
bracket of the cabinet (FIG. 8a ). Do this for both sides.
FIG. 8a
6. Insert top and bottom legs of window filler panel frame
into channel in the top angle and bottom rail. Do both
sides. Install side retainer to cabinet as shown. FIG 8B-
9.
Angle Rail
FIG. 7
FIG. 8b
FIG. 9

TOP VIEW

Placing the Cabinet Inside the Window
1. Open the window and place the cabinet in the middle
of the window sill.
2. Make sure the bottom rail is seated over the window
sill as shown below. Bring the window down temporar-
ily behind the top angle rail to hold the cabinet in place.
SILL
3. Fasten cabinet to window sill using two 7/8" Round
-Head screws. Pre-drill holes if needed. Add the bottom
rail seal over the screws.
STOOL
ANGLE
7/8" Round Head
Screw
10