Table of Contents
Advertisement
Setting Up the Hardware
2-4
7) Connect the microphone to the EVM.
8) Connect the power cable to the EVM power jack on the board. To be
ESD safe, do not plug in the other end of the cable yet.
9) If you will use the Ethernet connection, connect the Ethernet cable to
the Ethernet Port on the EVM and to an Ethernet network port.
Note that the U-Boot bootargs must include "ip=dhcp" to enable the
network connection.
Advertisement
Table of Contents
Need help?
Do you have a question about the TMS320DM6446 DVEVM v2.0 and is the answer not in the manual?