Connecting the Port Replicator
The Port Replicator is designed to assure a secure connection by a few
simple operations.
To connect the Port Replicator, follow the steps below.
Remove the rubber cover from the Docking Interface port.
1.
Make sure the engaging pins on the Port Replicator are down.
2.
Seat the computer between the Port Replicator's guide rails.
3.
Grasp the finger grips on either side of the Port Replicator and slowly
4.
push the computer toward the connector.
On the right side, be sure to put your finger behind the eject lever.
Press firmly to assure a secure connection.
5.
Slide the computer lock forward to prevent inadvertent release of the
6.
computer from the Port Replicator.
8-30 Optional Devices
Connecting to the Port Replicator
User's Manual