Pci Bus - Toshiba Satellite Pro 4300 User Manual

When the Parallel Port Mode (see settings below) is set to ECP, the DMA
channel can also be set to 1 or 3. The default is 3.
LPT setting
LPT 1
LPT 2
LPT 3
Not Used
Others

PCI bus

It is for information only and cannot be changed. It appears only in TSETUP.
PCI BUS
PC Card
This option lets you set the PC Card Controller mode.
PC Card Controller Mode
This option lets you set the PC Card Controller mode.
Auto-Selected
CardBus/16bit
PCIC Compatible
When Device Config is set to Setup by OS, you must set the PC Card to
Auto-Selected.
7-14 Setup and Password Security
I/O address
378H
278H
3BCH
IRQ** (Interrupt level is displayed.)
=
Use this setting for all PC Cards if you are using
a plug-and-play operating system. (Default)
If the card does not work properly with the Auto-
Selected setting, use this setting for CardBus PC
Cards.
If the card does not work properly with the Auto-
Selected and CardBus/16bit settings, use this
setting for 16-bit PC Cards.
Interrupt level
7
5
7
(Disables port)
(Other settings made automatically by
plug-and-play operating systems)
DMA Channel
3 (Default)
3
3
User's Manual