Connecting The Computer To The Noteworthy Port Replicator - Toshiba Satellite 110 Series User Manual

Using the Optional Noteworthy Port Replicator
The serial connector connects to the computer's serial port.
The power connector connects to the computer's power socket.
The parallel connector connects to the computer's parallel port.
The monitor connector connects to the computer's monitor port.
The docking lever secures the computer to the Port Replicator.

Connecting the Computer to the Noteworthy Port Replicator

To connect your computer to the Port Replicator, follow these
steps:
1 Turn the computer off.
2 Remove all cables from the back of the computer.
3 Place the Port Replicator on a level surface with the front
facing you.
4 Holding the Port Replicator with your left hand, push the
docking lever away from you.
The guide pins on the Port Replicator move forward to receive
your computer.
Aligning the computer with the guide pins
5 Align the two holes on the bottom of the computer with
guide pins on the Port Replicator.
6 Set the computer on the guide pins.
Part I: Getting To Know Your Computer
Using Your Computer on Your Desk
Guide pins
181
Docking lever