Hard Disk Mode - Toshiba Satellite Pro 4300 User Manual

USB Legacy Emulation
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB Legacy Emulation item in TSETUP
to Enabled.
USB Legacy Emulation
Parallel Port Mode
This tab lets you set the Printer Port type. Use the Windows Device
Manager to make settings for the Parallel port.
Printer Port Type
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional

Hard Disk Mode

Use this item to select the hard disk mode. The hard disk mode can be set
only in TSETUP.
Formats for Enhanced IDE and Standard IDE are different, so if you
change the setting, you will have to reformat the hard disk for the
appropriate setting.
Enhanced IDE
(Normal)
Standard IDE
User's Manual
= Disabled (Default)
= Enabled
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP. (Default)
This setting should be used with some other parallel
devices.
Select this mode when using MS-DOS,
Windows 95/98 or Windows NT. (Default)
Select this mode when using an operating
system that does not support Enhanced IDE. If
this mode is selected with MS-DOS, up to
504 MB is logically available even though the
disk's capacity is larger than 504 MB.
Setup and Password Security 7-7