Toshiba Satellite Pro 4300 User Manual page 71

Fn
Battery save mode: Pressing Fn + F2 changes the battery save mode.
If you press Fn + F2 in a Windows 95 environment, an icon panel is
displayed showing the setting. If you press Fn + F2 in a Windows 98
environment, the Power Scheme menu is displayed. You can name and
save your own custom configurations. When you press these hotkeys, the
current setting will be displayed in a window. You can also change this
setting through the Power Save Modes feature of the Power Saver.
Fn
Power up mode: Pressing Fn + F3 changes the power up mode. When
you press these hotkeys, the current setting will be displayed in a window.
If you use Windows 95, you can use the System window of the Power
Saver utility. In a Windows 98 environment, use the When I press the
power button item of the System Power Mode window in the Power Saver
utility.
Fn
Alarm volume: Press Fn + F4 to adjust the alarm volume to off, low,
medium or high. The first time you press Fn + F4 the volume is set to off.
Continue holding down Fn and press F4 again to change the setting. A
beep sounds to let you know the current alarm volume. The volume at
power on depends on the latest setting.
Fn
Display selection: Pressing Fn + F5 changes the active display device.
As indicated in the table below, the changes depend on the computer's
display type, current setting and whether you have an external monitor
connected.
TSETUP
Auto-Selected
Simultaneous
User's Manual
F2
+
F3
+
F4
+
F5
+
Active display
Internal
External
Internal and external
Change order
Int. Sim. Ext.
Ext. Int. Sim.
Sim. Ext. Int.
The Keyboard 5-5