Star Micronics LC-20 User Manual page 56

I
Set line spacingto n/72 inch
Mode ASCII Decimal Hexadecimal
Both <ESC> "A" n 27 65 n
16 41
n
In Standardmode,sets the distancethe paperadvancesor reverses
in subsequent l inefeedsto n/72inch,wheren is betweenOand255.
.If n =0, the line spacingis set to O.
In IBMmodethis commanddoesthe sameexceptthat (1) the new
line spacing does not take effect until the next <ESC> "2"
command,and (2) if n = O,the cESC> "A" commandis ignored.
Execute<ESC> "A"
Mode ASCII Decimal Hexadecimal
IBM <ESC> "2" 27 50
IB 32
Sets the line spacing to the value defined by the last preceding
cESC> "A" command.Sets the line spacingto 1/6inch if them is
no precedingcESC> "A" command.
Line feed
'Mode ASCII
Decimal Hexadecimal
Both <LF> 10 OA
Prints the currentline and feedsthe paper to the next line. See the
precedingcommandsfor the line spacing.
Reverseline feed
Mode ASCII
Decimal Hexadecimal
std.
<ESC> <LF> 27 10 IB OA
IBM
1
<ESC> " " 27 93
IB 5D
Printsthe currentlineandfeedsthepaperinthe reversedirectionto
the preceding line. See the preceding commands for the line
spacing.Ignoredwhen frictionfeed is used.
48