Table of Contents
Advertisement
Switch 2-1: The
actionof this switch dependson the mode chosen with
switch 1-1.
If you selected standard
mode, do you want italics or graphics
characters?
Setthis switchOFFto printitalicsin the standardcharacterset. If youleave
this switch in the ON position,in place of italicsyou will get the graphic
characte~, internationalcharacters, and mathematicalsymbols of IBM
characterset #2. See Chapter9, charactercodes 128to 254.
If you
selectedIBMmode,do youwantIBMcharacterset#l or#2?
ON selectscharacterset #2, whichis for computerswith an 8-bitinterface
(the most commonkind).
OFF selectscharacterset #1, for computerswith a 7-bit interface.
Switches 2-2 to 2-4:
Do you want an internationalcharacterset?
International c haractersetsdifferin theirassignmentof 14charactercodes.
See the charactertables at the back of this manual.With the DIP switches
you can selectone of eight charactersets as follows:
Country
2-2
2-3
2-4
Country
2-2
2-3
2-4
U.S.A.
ON
ON
ON
DenmarkI *
ON
ON
OFF
France
OFF ON
ON
Sweden
OFF ON
OFF
Germany
ON
OFF ON
Italy
ON
OFF OFF
England
OFF OFF ON
SpainI
OFF OFF OFF
* Denmark/Norwaywhen switch2-1 is ON.
32
—
Advertisement
Table of Contents
